Mastercam Translators X5
Mastercam supports the import and export of several file formats. You can find what file format versions are supported in each Mastercam release in the tables below.
Send any comments or questions to Mastercam support.
X5
| TRANSLATOR | EXTENSIONS | VERSION | R/W | SOLIDS | INFO |
|---|---|---|---|---|---|
| .CATIA V5 Read** | .CATPart, CATProduct | R21 SP3 | R | R | Mastercam X5 CATIA V5 Read Translator ACC File Required: catv5in ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). |
| ACIS | .SAT | R21 SP3 | RW | RW | |
| ACIS | .SAB | R21 SP3 | R | R | |
| Autocad | .DWF, .DWFX | 2012 | R | N/A | |
| Autocad | .DWG, .DXF | 2012 | RW | RW | Mastercam X5 Autocad *.DWG / *.DXF Translator Use DXFRescuer c-hook for non-standard DXF files. |
| Autodesk Inventor | .IDW | 2012 | R | N/A | |
| Autodesk Inventor | .IPT, .IAM | 2012 | R | R | Mastercam X5 Autodesk Inventor .IPT / .IAM Translator Import Type: Brick (No History Tree) Requires Inventor or Inventor View of the same version or newer; Solids only |
| Cadkey | .CDL | N/A | R/W | N/A | |
| CATIA V4** | .MODEL, .EXP | 4.1.9 – 4.2.4* | R/W | R/W | Mastercam X5 CATIA V4 Translator ACC File Required: catv4 ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). |
| CATIA V5 Write** | .CATPart | R21 SP3 | W | W | Mastercam X5 CATIA V5 Write Translator ACC File Required: catv5out ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). |
| EPS | .AI, .EPS | 7,8* | R | N/A | |
| Geomagic Design | .AD_PRT, .AD_SMP | V12 | R | R | |
| IGES | .IGS | 5.3 | RW | W | Mastercam X5 IGES Translator Solids are converted to surfaces, no views or drawing layouts are available. |
| KeyCreator | .CKD | V9 | R | R | Mastercam X5 KeyCreator Translator Translator reads solids only |
| Parasolid | .X_T, .X_B, .XMT_TXT | 21 | R/W | R/W | |
| ProE / Creo** | .PRT, .ASM | Wildfire5 | R | R | Mastercam X5 ProE Translator ACC File Required: proe ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). This translator is available to Industrial customers only. |
| Raster 2 Vector** | .JPG, .TIF, .BMP | N/A | R | N/A | Mastercam X5 Raster 2 Vector Translator ACC File Required: rast2vec ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). Included with Art, Router, Router Plus, Router Pro, and Mill levels 1,2,3. ACC required for Router Entry, Mill Entry, Lathe, Wire, and Design |
| Rhino | .3DM | 5 | R | N/A | |
| SolidEdge | .PAR, .PSM, .ASM | ST3 | R | R | Mastercam X5 SolidEdge Translator Translator reads solids only. |
| SOLIDWORKS | .SLDDRW | 2011 | R | N/A | Mastercam X5 SOLIDWORKS *.SLDDRW Translator SOLIDWORKS must be installed for this translator to function. |
| SOLIDWORKS | .SLDPRT, .SLDASM | 2011 | R | R | Mastercam X5 SOLIDWORKS *.SLDPRT / *.SLDASM Translator Translator reads solids only. SOLIDWORKS must be installed to import history tree. |
| SpaceClaim | .SCDOC | All | R | R | Mastercam X5 SpaceClaim Translator Translator reads solids only. No assembly support. |
| STEP | .STP, .STEP | All | R/W | R/W | Mastercam X5 STEP Translator “Part 42” data/AP203, AP214 |
| Stereolithography | .STL | 1 | R/W | W | Mastercam X5 STL Translator Translator creates polygonal mesh entities. |
| Unigraphics** | .PRT | NX7.5 | R | R | Mastercam X5 Unigraphics Translator ACC File Required: ug ACC files are needed for HASP users. ACC files are placed in the \shared main folder (for example: \shared mcamx5). |
| VDA | .VDA | 2 | R/W | W | Mastercam X5 VDA Translator Translator converts solids to surfaces. |
*Only the versions listed are supported.
** These translators are not included with Mastercam and need to be purchased for an additional cost. Please contact your Mastercam Channel Partner for more information.